Search results

Liemohn makes the Colt 9mm DOE clones… IIRC the California company that made the 9mm flats was bought by PTR

PTR iirc bought lsc

Correct on parts… but incorrect on using 33 Ctube. The best is to either use a ptrg3k or have smith cut down a g3 - the 33 does not have correct internal length and internal cam angle for the charge handle

Correct- I bought MGW last one … it is a special version for the SG1 packs and seems the end of the road for these has occurred

Trying again

Best have plenty of argon and TIG wire

Thanks Tony.

Just received these back from one of the classic masters in the industry … Full Auto delete and ClipNPin but retain all rest the goodness of the G3sg1 trigger packs. Plus in future another owner can have a sear installed since the hard parts have been done.

It is an HK production tripod for the MG3/MG74 That is partially disassembled- the soft mount is the upper portion of the tripod

The closed one will have less ring to it and likely will not come apart as the clone mini 53 FH do

Found the half from years back when the hider went south. I switched back to standard bird cage. It was clear that the material selected and the sharp flute edge at the termination of the cut exasperated the problem/design. Doesn’t look like the revised improved the design

Had the exact same FH on a G3K DMR build... split exactly the same - the sharp cut at the termination of the slot is where the crack / failure seemed to be on my hider. I think i have it laying around here somewhere as a reminder of what/where to get parts from.

Rebounding Thanks

Yes, tried Adam!

Not a standard metal frame SEF selector but the Selector for the G3SG1 pack. Builder lost the original one and need to get a replacement. Thanks in advance. (yes I have checked with HK, MGW, Brownells, Numrich... ) JB

Nice work Ed

Great work Ed John

Tony- yes Jeff is one on the shorter list for the heavy bbl builds. I bought an original Urbach Psg1 barrel from a local collector as well as some other PSG1 parts. I thought Jeff or “Blackwing” at one time converted metal swing down housings to clip/shelf looks like the 21e maybe a larger...

Few last projects to finish... Who clips and pins metal lowers (have specific ones that want back versus exchange)? Rumor has it MIke/TSC is not doing 21e/23e semi builds anymore... Terry D is booked, not sure about Ralph RDTS... so any one left? I have a line on a German 21e/23e kit and HK91...