What's new
HK Proshop : For the Heckler and Koch Enthusiast

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

G3sg1 post sample build - need advice

spartan

Well-known member
Feedback: 1 / 0 / 0
Joined
Nov 21, 2020
Posts
104
Looking for advice on most likely getting a g3sg1 built. Wanting 1moa or better accuracy, flash hider / suppressor option.

I guess what it all comes down to is that I have a g3sg1 trigger and I'm not about to clip and pin it for use on a 91... I'm also not going to engrave a 91 and drill a hole for a pin... so only solution besides a transferable is to build one.

What barrel should I get?
What are main considerations for accuracy?

Thank you all!

James
 

Blackwing

Well-known member
Feedback: 0 / 0 / 0
Joined
Nov 22, 2020
Posts
122
Location
Undisclosed Bunker
1646859743091.png

Why not trim a regular G3 FCG housing and put the SG guts in it? You can get a full monte for $50 from RTGParts.
 

Attachments

  • 1646859742247.png
    1646859742247.png
    413.7 KB · Views: 2

spartan

Well-known member
Feedback: 1 / 0 / 0
Joined
Nov 21, 2020
Posts
104
Very interesting idea.

Just realized it is a one pin not two rear on the grip housing so I'm going to throw it on my hk33 instead ;). Do you think it's worth swapping the hammer spring or leaving that as is? Will swap ejector of course.
Still tempted to build a new gun with a ptr psg1 barrel though...
 
Top