What's new
HK Proshop : For the Heckler and Koch Enthusiast

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

HK "Operational Briefcases"

Status
Not open for further replies.

AGG

Staff member
Feedback: 4 / 0 / 0
Joined
Nov 11, 2020
Posts
5,853
Location
Alabama
Operational Briefcases” (case made by Hofbauer to HK specifications; HK manufactured the handle and metal internals therein- 1. and 2.)

1. markings (left upper corner inside the bottom of the case- circle with “>PP<””; upper left center of the top edge of the bottom of the case- “hofbauer D-82152 Planegg”; right upper corner inside the bottom of the case- circle with “0 upwards arrow 1” or “1 upwards arrow 0” inside circle with “1 2 3 4 5 6 7 8 9 10 11 12”; upper right corner of the top edge of the bottom of the case “Made in Germany”); 4 “-” flat head screws (2 each side) in plastic handle; hinges/keys are German-made; German Stanag mount; straight trigger arm (ambidextrous trigger pack housings or crooked (“3-arm”) trigger arm (SEF trigger pack housings); metal barrel shroud will not accept PDW barrels

2. markings (left upper corner inside the bottom of the case- circle with “>PP<””; upper left center of the top edge of the bottom of the case- “hofbauer D-82152 Planegg”; right upper corner inside the bottom of the case- circle with “0 upwards arrow 1” or “1 upwards arrow 0” inside circle with “1 2 3 4 5 6 7 8 9 10 11 12”; upper right corner of the top edge of the bottom of the case “Made in Germany”); 4 “+” Phillips head screws (2 each side) in metal handle; hinges/keys are German-made; German Stanag mount removed by Kuwaitis, and replaced with ARMS Stanag mount in the U.S.; straight trigger arm (ambidextrous trigger pack housings or crooked (“3-arm”) trigger arm (SEF trigger pack housings); metal barrel shroud will not accept PDW barrels (Kuwaiti Contract)

3. markings (left upper corner inside the bottom of the case- “?”; upper left center of the top edge of the bottom of the case- “?”; right upper corner inside the bottom of the case- “?”; upper right corner of the top edge of the bottom of the case “?”; 4 “+” Phillips head screws 2 each side) in metal handle; hinges/keys are U.S.-made; ? Stanag mount; straight trigger arm (ambidextrous trigger pack housings or crooked (“3-arm”) trigger arm (SEF trigger pack housings); metal barrel shroud will not accept PDW barrels (Todd Bailey/Special Weapons replicas)

Tony
 
Status
Not open for further replies.
Top