HK Proshop : For the Heckler and Koch Enthusiast
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Removing Stock on SAR 3
- Thread starter crazy11alpha
- Start date
NEW To HK-91's is see 
Put the last 1" of the stock in a Vice (Covered with Cardboard if you don't want to damage it)
and POP OFF the small part that your shoulder rests on.
Talk a LONG screwdriver and remove the screw that attached the stock to the buffer.
The wood stock simply has two screws I believe
Put the last 1" of the stock in a Vice (Covered with Cardboard if you don't want to damage it)
and POP OFF the small part that your shoulder rests on.
Talk a LONG screwdriver and remove the screw that attached the stock to the buffer.
The wood stock simply has two screws I believe
Guyanaman1963
Well-known member
Yup!!! If that was me... it would have been ruined!NEW To HK-91's is see
Put the last 1" of the stock in a Vice (Covered with Cardboard if you don't want to damage it)
and POP OFF the small part that your shoulder rests on.
Talk a LONG screwdriver and remove the screw that attached the stock to the buffer.
The wood stock simply has two screws I believe
Great directions BTW.
M.
I've always put the buttpad in soft-jaws and a rag, in my vise...and yanked on the stock. Push on it in several directions. They pop right off. Shouldn't be any damage, but is cheaper and more solid in the vise, than the hollow stock.
