My Girls Side Hustle...Praetorian Laser WRX

[bystok]

Hey.....it dawned on me many of you here may not know my girls little side hustle called Praetorian Laser WRX. They are staying busy adding Navy and Burst markings to HK SP5 and SP5K housings and doing quite a few custom magazine projects. With the introduction of the Rare Breed RD3 in both ambi and SEF, they are also doing several 25/30 markings to the 0/1 MKE housings as well. They can be followed and reached on their Instagram page or if you have interest in their email, you can PM me for that detail.

Some samples:

 

[Tailflash]

What is possibility of re-doing an HK23E/21E Trigger Grip to make the original pictograms a bit more pronounced (like the G3 on the left)? This area seems to collect a lot of smoke residue quickly and sometimes the markings are nearly obscured by soot.

Thanks, Dane

 

[bystok]

What is possibility of re-doing an HK23E/21E Trigger Grip to make the original pictograms a bit more pronounced (like the G3 on the left)? This area seems to collect a lot of smoke residue quickly and sometimes the markings are nearly obscured by soot.

Thanks, Dane

View attachment 13431

It would require re-lasering which has risks. The factory HK markings are not deep as you know and don't hold up well to "real use" without showing wear or "wear off"! Since the E housings are hard to acquire and super expensive when found, I wouldn't touch it.

 

[AGG]

Excellent work.
The best of luck on her venture.

Tony