Search results

Time is relative!!! Nice find

Enjoy!!!

Just saw this, yes the SG1 is a completely different selector axle than PSG1

If you need the sear trip lever to correctly delete the safety sear and relocate to SA hole I have a couple of spares John

HK SR9 on GB just went for $2550… GB1092206022

Terry Dyer did the work on the packs, and installed a new G3sg1 parts kit on a German HK91 for one pack Brad Bonhoff is making some hybrid G3DMR builds for me for the last 2 packs. Should have them back in near future

Liemohn makes the Colt 9mm DOE clones… IIRC the California company that made the 9mm flats was bought by PTR

PTR iirc bought lsc

Correct on parts… but incorrect on using 33 Ctube. The best is to either use a ptrg3k or have smith cut down a g3 - the 33 does not have correct internal length and internal cam angle for the charge handle

Correct- I bought MGW last one … it is a special version for the SG1 packs and seems the end of the road for these has occurred

Trying again

Best have plenty of argon and TIG wire

Thanks Tony.

Just received these back from one of the classic masters in the industry … Full Auto delete and ClipNPin but retain all rest the goodness of the G3sg1 trigger packs. Plus in future another owner can have a sear installed since the hard parts have been done.

It is an HK production tripod for the MG3/MG74 That is partially disassembled- the soft mount is the upper portion of the tripod

The closed one will have less ring to it and likely will not come apart as the clone mini 53 FH do

Found the half from years back when the hider went south. I switched back to standard bird cage. It was clear that the material selected and the sharp flute edge at the termination of the cut exasperated the problem/design. Doesn’t look like the revised improved the design

Had the exact same FH on a G3K DMR build... split exactly the same - the sharp cut at the termination of the slot is where the crack / failure seemed to be on my hider. I think i have it laying around here somewhere as a reminder of what/where to get parts from.

Rebounding Thanks

Yes, tried Adam!