HK45c V7 Upgrades

[MuGiG]

So I’m upgrading my LEM 45c with Gray Guns straight trigger, the trigger reset system and the enhanced match flat sear spring.

As far as the TRS, (trigger return spring) I really don’t think I’ll to need to upgrade to any Match or heavy TRS or a Hammer Spring.

I’ve given up on the Titanium firing pin. I can’t find it anywhere in stock. I think I’m all set, but am I missing anything as far as upgrades goes?

 

[Guyanaman1963]

First off… Welcome to the site!
In my opinion, if I had the match springs and had the gun apart, I would change the springs… albeit Im afraid of the TRS.
As for the Titanium firing pin, I would be fine with it either way… I have never heard of a bad firing pin in a HK. Not saying it never happened just never heard of it.
This is just my opinion from a guy that doesn’t really like LEM’s.
Take my opinion with a grain of salt.
M.

 

[ENDER]

Best $18 I ever spent, TRS springs - bring em on. The nightmare in my opinion is re-installing the hammer, cocking piece and cocking piece spring.

 

[HK12Step]

Best $18 I ever spent, TRS springs - bring em on. The nightmare in my opinion is re-installing the hammer, cocking piece and cocking piece spring.

View attachment 11786

Agreed. I have the OG $9.95 pair and they work like a charm.

But your picture makes them look cooler

 

[ENDER]

Agreed. I have the OG $9.95 pair and they work like a charm.
View attachment 11790
But your picture makes them look cooler

Would rather of had your version. I fixed my post - no sense in advertising for them for free

 

[HK12Step]

Would rather of had your version. I fixed my post - no sense in advertising for them for free

I see those scribble marks…well played my friend. All joking aside @ENDER is absolutely correct, these are a must have for any HK pistol owner.

 

[brad608]

I JUST GOT A 45CT WITH LEM. I CAN NOT AND PROBABLY WILL NOT UNDERSTAND WHAT MAKES THE LEM DESIRABLE. WHY DO I WANT A TWO AND A HALF INCH TRIGGER PULL INSTEAD OF A SAFTEY?

 

[LEMming]

Best $18 I ever spent, TRS springs - bring em on. The nightmare in my opinion is re-installing the hammer, cocking piece and cocking piece spring.

View attachment 11791

Yep. That's why, even though all of my hammer HK's are usually LEM, I always keep a few DA/SA hammers laying around. Last time I had my P2K apart, reinstalling the LEM hammer components annoyed me enough that, out of anger, I just threw the DA/SA hammer in and planned to revisit the LEM setup next time around.

 

[AGG]

Welcome to the site--- report after testing.

Tony