Search results

I’ll kick it off—finally picked up a couple extra mags and a new holster for my HK this weekend. Nothing too exciting, but it’s always satisfying adding a few practical upgrades. Been thinking about a trigger upgrade next, but still on the fence. It’s funny how these “small” purchases add up...

From what I’ve seen, HK typically uses a strong thread locker on those, often similar to Rocksett, so a little heat and patience usually goes a long way. A proper reaction rod or solid barrel support is definitely worth it to avoid stressing the receiver.

That’s a look at the finalized setup. The G95A1 really represents the evolution of the HK416 platform and it’s interesting to see how the Bundeswehr refined the configuration after trials. They made some changes, like moving to M-LOK updating the stock and optimizing the weight. The fact that...

That is always a decision and it really comes down to what you want. I think it is better to keep the barrel the way it is because it is connected to the receiver and that is a big part of what makes the rifle special. You can always find a barrel to use later and that will give you more...

Welcome to the group. You have started with some good phones like the CC9, the P30 and the VP series. These phones are all a little different so you can see what the company is about. This is a place to learn about the CC9, the P30 and the VP series because there are a lot of people here who...

I think it’s just a mix of timing and expectations. The HK CC9 is actually getting solid feedback overall—good ergonomics, reliability, and it shoots better than most micros its size . But it showed up late to a crowded market, so it doesn’t feel “new” to a lot of people. Also, HK fans tend to...

That sounds like a pretty solid opportunity. The P8 A1, especially in German military configuration, has some real collector appeal, and the translucent mags add a nice authentic touch. At $1,250, it’s not a steal, but it’s within a fair range given condition and originality.

Those HK 510 shotguns are pretty obscure, so you’re not alone—documentation is really scarce. From what’s been shared over the years, they were single-shot 12 gauge guns with receivers reportedly made by Franchi and assembled in Germany, which explains why info is so limited. You might have the...

That sounds about right for a UMP in .40—once you get into longer bursts, they can get pretty lively. The recoil impulse is a bit snappier compared to 9mm, so it’s not surprising it started walking on you. Short, controlled bursts usually keep things much more manageable. Still, part of the...

Sounds like a solid move sending it off to HDPS—those conversions can really transform the feel of the USC. From what I’ve seen, most people go that route once they’ve gathered the key parts like the stock block and UMP lower, since it saves a lot of trial-and-error. The biggest upgrade is...

HK also made their own steel and later polymer mags, which are a bit heavier but very durable. Some earlier 416/MR556 lowers were known to be a little tight, so certain mags (like older PMAGs) didn’t always drop free, while newer Gen 3 versions tend to work fine.In general, most people just run...

That is a move but honestly it makes a lot of sense. Heckler & Koch teaming up with A-TEC brings together a rifle platform maker with a company known for solid suppressor design. If Heckler & Koch and A-TEC integrate things well it could mean out-of-the-box compatibility and performance...

You are on the track. There were a lot of Middle Eastern G3 users. The brown furniture you are thinking of is usually found on G3s. They used a kind of handguard that is brown. Sometimes people think it is made of wood. Pakistani G3 rifles are usually green or black. Turkish and Saudi G3s are...

Nice find—those are definitely not something you see every day. The HK 770 itself was a semi-auto sporting rifle made in Germany in the late ’70s–’80s, using the same roller-delayed system as the G3, just in a hunting configuration. The.243 version is very hard to find in the US. Some people...

It's unusual to find electrical components inside a G3 trigger housing from a standard parts kit. This suggests it might be a custom modification aimed at enhancing the rifle's functionality, possibly with electronic triggers or similar upgrades.

This video humorously discusses the evolution of the term "mess" in the military, showing how it now refers to social and professional centers within units, not just dining halls.

That's a frustrating situation with the HK claw mount not fitting your HK91s. It sounds like you've done a great job diagnosing the problem by checking the plastic bumper, mounting direction, fit on the rear sight base, and comparing it to another mount. The extra thickness and step on the claw...

Generous offer on the USP40 magazine! It's great that you're giving back to the community by offering a free item to someone who can actually use it. Just a heads up that the forum rules mention this thread is intended for regular contributing members, but anyone can request the item and the...