Been playing with my “new” TiG welder....

Looks good!! You can never have enough mp5’s!!! This number 86?????
 
Grease Gunner said:
One 28 round magazine at 25 yards. Still shooting semi auto-the full auto tests are this weekend.

Note the 2 flyers I knew as soon as I pulled the trigger. Still it’s shaping up nicely.....
Click to expand...

Looks awesome--- sure you didn't miss one? :ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO:

Tony
 
I put 500 rounds through the FB5 today.....including 8 mag dumps of 25 per (sorry I didn’t get video) yes that was “200 rounds of I didn’t care” now I’ll have to engrave it at work as my cnc mill isn’t home and setup yet.
 

Attachments

  • 18DA6718-2578-4A8F-B5EC-946224F794AE.jpeg
    18DA6718-2578-4A8F-B5EC-946224F794AE.jpeg
    176.5 KB · Views: 9
  • 67A1FFA2-2DDC-4621-97D2-38A8E9FAF53A.jpeg
    67A1FFA2-2DDC-4621-97D2-38A8E9FAF53A.jpeg
    101.3 KB · Views: 8
Grease Gunner said:
I put 500 rounds through the FB5 today.....including 8 mag dumps of 25 per (sorry I didn’t get video) yes that was “200 rounds of I didn’t care” now I’ll have to engrave it at work as my cnc mill isn’t home and setup yet.
Click to expand...

Excellent--- you entered Base Leprechaun in the second picture. ;)

Tony
 
Well it’s testing went well, so I engraved it at work since my cnc mill isn’t home yet. I learned a few more things-like make the caliber markings smaller to fit it all in there. Once my cerakote Guy gets an opening, I’ll have it done up to match my BPP HK23EK.

Note I even date coded it to match the “21” for being made in 2021 :-)
 

Attachments

  • 27A82905-B545-465F-9D52-17D0EE5214AB.jpeg
    27A82905-B545-465F-9D52-17D0EE5214AB.jpeg
    197.8 KB · Views: 7
  • 0E7DAB7A-702F-40F6-BBDD-0DB7506DF88C.jpeg
    0E7DAB7A-702F-40F6-BBDD-0DB7506DF88C.jpeg
    153.4 KB · Views: 7
  • 000B8427-2770-4139-9A46-A4A04C29C2B1.jpeg
    000B8427-2770-4139-9A46-A4A04C29C2B1.jpeg
    72.8 KB · Views: 7
  • 3CB4FF1B-77C7-475F-8A39-B4F4FDA4AA90.jpeg
    3CB4FF1B-77C7-475F-8A39-B4F4FDA4AA90.jpeg
    65.4 KB · Views: 7
Grease Gunner said:
Well it’s testing went well, so I engraved it at work since my cnc mill isn’t home yet. I learned a few more things-like make the caliber markings smaller to fit it all in there. Once my cerakote Guy gets an opening, I’ll have it done up to match my BPP HK23EK.

Note I even date coded it to match the “21” for being made in 2021 :)
Click to expand...

Very nice. ;)
But shouldn't a CB (21) have CAL.? :ROFLMAO::ROFLMAO::ROFLMAO::ROFLMAO:

Tony
 
You must log in or register to reply here.
Back
Top