@Guyanaman1963, this is for you Brother.
After the last two write ups @Guyanaman1963 asked for a write up about the HK USP Match
Below are the three factory configurations that were mass produced. The 9mm two tone with stainless slide. The 45 acp in two tone with stainless slide and in all black.
Everyone’s favorite, including Lara Croft, two 9mm USP Match stainless pistols.
The six below are clones in different configurations and stages of development.
The USP Match even shows up in the airsoft world. The one on the left is a KSC from Japan. The one on the right is from Evike in the US.
From my research the Match has predominantly been shipped in 4 forms.
The Black soft case, a custom cardboard box, a woodgrain aluminum European case, and a black aluminum European case.
The difference between the standard USP and the Match, is the weight, match grade barrel with o-ring, match height adjustable sights and the match trigger/hammer kit.
Below are a few Jarvis and HK match/sport barrels.
On the right the top barrel is the Jarvis 9mm match barrel cut to a shorter length to work with the aftermarket “Match Weight” weights. The second barrel is an HK 9mm match barrel and the bottom is the Jarvis barrel cut to 6.02” to work with the factory match weight.
On the left top is a Jarivs 40 S&W barrel and on the bottom is a HK 40 S&W barrel.
The weight on the left is an aftermarket steel “Match Weight” the one on the right is an HK factory weight.
The bottom barrel is a factory HK 45 acp Match barrel.
The picture below shows the match/hammer kit and a set of LPA adjustable match height sights.
A little eye candy. A group picture of all of my Factory HK USP Match pistols.
Thanks
Doc
After the last two write ups @Guyanaman1963 asked for a write up about the HK USP Match
Below are the three factory configurations that were mass produced. The 9mm two tone with stainless slide. The 45 acp in two tone with stainless slide and in all black.
Everyone’s favorite, including Lara Croft, two 9mm USP Match stainless pistols.
The six below are clones in different configurations and stages of development.
The USP Match even shows up in the airsoft world. The one on the left is a KSC from Japan. The one on the right is from Evike in the US.
From my research the Match has predominantly been shipped in 4 forms.
The Black soft case, a custom cardboard box, a woodgrain aluminum European case, and a black aluminum European case.
The difference between the standard USP and the Match, is the weight, match grade barrel with o-ring, match height adjustable sights and the match trigger/hammer kit.
Below are a few Jarvis and HK match/sport barrels.
On the right the top barrel is the Jarvis 9mm match barrel cut to a shorter length to work with the aftermarket “Match Weight” weights. The second barrel is an HK 9mm match barrel and the bottom is the Jarvis barrel cut to 6.02” to work with the factory match weight.
On the left top is a Jarivs 40 S&W barrel and on the bottom is a HK 40 S&W barrel.
The weight on the left is an aftermarket steel “Match Weight” the one on the right is an HK factory weight.
The bottom barrel is a factory HK 45 acp Match barrel.
The picture below shows the match/hammer kit and a set of LPA adjustable match height sights.
A little eye candy. A group picture of all of my Factory HK USP Match pistols.
Thanks
Doc