Fitting up an HK21E…

Grease Gunner

Grease Gunner

Well-known member
Joined
Nov 22, 2020
Posts
562
Location
Tuscarawas County Ohio
Feedback: 2 / 0 / 0
Picked up this receiver back in the spring and it needed some minor stuff done to finish it out and then assemble. I found the correct HK feed mec, bolt, and barrel assembly as well as the correct stock, so now it’s time to start assembly.

Still need the following to compete the gun:

Ejector lever
Recoil spring
1200M Rear sight

Hoping to make the cocking handle support this weekend.
 

Attachments

  • 519D4056-DE5F-4E74-93B6-2C0E4214A2E8.jpeg
    519D4056-DE5F-4E74-93B6-2C0E4214A2E8.jpeg
    146.1 KB · Views: 37
  • D39DF265-95C9-4061-84BF-385BDE9D5813.jpeg
    D39DF265-95C9-4061-84BF-385BDE9D5813.jpeg
    108.7 KB · Views: 34
Grease Gunner said:
Picked up this receiver back in the spring and it needed some minor stuff done to finish it out and then assemble. I found the correct HK feed mec, bolt, and barrel assembly as well as the correct stock, so now it’s time to start assembly.

Still need the following to compete the gun:

Ejector lever
Recoil spring
1200M Rear sight

Hoping to make the cocking handle support this weekend.
Click to expand...
www.midwestgunworks.com

Heckler and Koch HK11 / HK21E 1200M Adjustable Rear Sight

Check out the deal on Heckler and Koch HK11 / HK21E 1200M Adjustable Rear Sight at MGW
www.midwestgunworks.com www.midwestgunworks.com
hkparts.net

HK23E Recoil Spring - 5.56/.223

H&K Heckler & Koch HK23E Recoil Spring - 5.56/.223
hkparts.net hkparts.net
 
I got your gun here so I'll let you know what we find out... I'd be curious On the guy that put the receiver together finding a lot of issues but I'll keep you informed brother.
 
You must log in or register to reply here.
Back
Top