G3sg1 post sample build - need advice

[spartan]

Looking for advice on most likely getting a g3sg1 built. Wanting 1moa or better accuracy, flash hider / suppressor option.

I guess what it all comes down to is that I have a g3sg1 trigger and I'm not about to clip and pin it for use on a 91... I'm also not going to engrave a 91 and drill a hole for a pin... so only solution besides a transferable is to build one.

What barrel should I get?
What are main considerations for accuracy?

Thank you all!

James

 

[Blackwing]

Why not trim a regular G3 FCG housing and put the SG guts in it? You can get a full monte for $50 from RTGParts.

 

[AGG]

Maybe a PTR PSG-1 Match Barrel, if available.

Tony

 

[spartan]

Very interesting idea.

Just realized it is a one pin not two rear on the grip housing so I'm going to throw it on my hk33 instead . Do you think it's worth swapping the hammer spring or leaving that as is? Will swap ejector of course.
Still tempted to build a new gun with a ptr psg1 barrel though...

 

[AGG]

Isn't the same spring used on both?

Tony